Sadana Brothers New Delhi, Delhi

Send SMS
Contact Us

Physics Lab Instruments

Bicycle Wheel Gyroscope

Bicycle Wheel Gyroscope

Approx. Rs 10 / Onwards

Over the years of experience in the industry, we have been able to provide the customers with an astounding assortment of Bicycle Wheel Gyroscope. Dramatically demonstrate angular momentum, our offered range of products try to change its axis of rotation. The faster it spins the harder it is to tip over. To suit the varied requirements of our valuable customers, our products are also available in customized solutions according their exact requirements.

 

Other details:

 

Pulley, Single, With Three-Way Attachment

Pulley, Single, With Three-Way Attachment

Approx. Rs 10 / Piece

For clamping to vertical or horizontal rods and to laboratory tables, boards etc. Comprised of a specially designed cast bracket which can be clamped on flat surface 38mm thick and hold a supporting rod 13mm diameter. At the rear of the bracket, a light alloy pulley about 70mm diameter is mounted on brass bearings. Includes two clamping screws for fitting to bench and vertical rod support. Hammer tone stove enamel finish.

Additional Information:

Pulley With Rod

Pulley With Rod

Approx. Rs 10 / Onwards

For applications where a pulley is to be supported at various heights and angles. Specially suited for inclined plane experiment. A plastic pulley, diameter 50mm is mounted on a metal frame attached to a plated rod about 10mm in diameter and 15cm long.

Additional Information:

Pulley with Table Clamp

Pulley with Table Clamp

Approx. Rs 10 / Piece

Useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley can be removed and used separately.Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a 50mm diameter pulley and rod. Pulley adjusts to 10cm height (minimum) and rotates a full 360º

Additional Information:

Pulley, Single, Clamp Type, Bench Mounting

Pulley, Single, Clamp Type, Bench Mounting

Approx. Rs 10 / Onwards

For clamping on bench tops or boards. Aluminium pulley, diameter 50mm with v-groove, is mounted on a frictionless cone bearing and fitted on a frame with clamp for fixing to any surface upto 25mm thick with a thumbscrew. Enamelled finish.

Additional Information:

Plastic Pulleys

Plastic Pulleys

Approx. Rs 10 / Onwards

Made of rigid colored plastic with deep V-grooves. Balanced for free movement. Pulleys are about 50mm in diameter and are mounted in parallel mode on aluminium strips with hooks at both ends.


Type Single Double Triple Quadruple
Cat. No. 3470-01 3470-02 3470-03 3470-04

Pulley Set, Student

Pulley Set, Student

Approx. Rs 10 / Onwards

Basically similar to the pulley set described above.

Comprised of a rectangular laminated wooden base approx. 12.5 x 15cm which supports a threaded rod measuring about 12.5mm x 61 cm in a metal flange, fitted with a capstan and a screw eye.

Six clamps (hook collars) are provided for suspending pulleys and cords on an adjustable cross rod approx. 9.5mm x 20cm, held by a right-angle clamp.

Supplied with:



Additional Information:

Aluminium Pulleys

Aluminium Pulleys

Approx. Rs 10 / Onwards

Pulleys with deep V-grooves are balanced for free movement. Mounted on aluminium frame with hooks at both ends. Diameter 50mm.

Type Cat. No.
Single 3474-01
Double parallel 3474-02
Triple parallel 3474-03


Pulley Plastic With Bearings

Pulley Plastic With Bearings

Approx. Rs 10 / Onwards

These plastic pulleys have ball races mounted on a metal frame for smooth running.


Type Cat. No.
Single with hook 3470-20
Double with hook 3470-21
Triple with hook 3470-22
Double in tandem with 2 hooks 3470-23
Triple in tandem with 2 hooks 3470-24

Pulley, Fixed, For Mounting On Plane Surface

Pulley, Fixed, For Mounting On Plane Surface

Approx. Rs 10 / Onwards

Suitable for experiments involving inclined plane where mounting on plane surfaces is required. Consists of a pulley, diameter 37mm mounted in bracket having two fixing holes for screwing on to a surface. Both parts are made of aluminium.

Additional Information:

Pulley Demonstration Set

Pulley Demonstration Set

Approx. Rs 10 / Onwards

For demonstrating and performing quantitative experiments on fixed and moveable pulleys, trains of fixed and moveable pulleys, the wheel and axle and the capstan etc. Helps understand the concepts of the mechanical advantage, the efficiency of fixed and moveable pulleys, etc.

Comprised of a rectangular laminated wooden base about (I x d), 20 x 82cm which supports two threaded rods measuring approximately 12.5mm x 81cm in metal flanges and is fitted with a capstan and a screw eye.

Eight clamps (hook collars) are provided for suspending pulleys and cords on an adjustible cross rod approximately 12.5mm x 81cm, held by right-angle clamps.

Supplied with:



Additional Information:

Glass Over Flow Can

Glass Over Flow Can

Approx. Rs 10 / Onwards

For easy viewing of the experiment. Made of borosilicate glass with capacity of 500mL.

Additional Information:

Metal Disc Set

Metal Disc Set

Approx. Rs 10 / Onwards

Metal Disc Set, 25Mm, Set Of 8, diameter, packed together in a small zip bag. Sent with silica gel to help prevent rust. Contains one each of brass, zinc, bronze, stainless- steel, copper, mild- steel,nickel-silver, and aluminum.

Type Cat. No.
Stamped 3473-91
Un-stamped 3473-92



Pressure Syringe

Pressure Syringe

Approx. Rs 10 / Onwards

Demonstrates that liquid pressure is transmitted equally in all directions. Consists of a borosilicate glass bulb, of 50mm diameter with holes, fitted with a piston for compressing liquids. Total height about 250mm.

Additional Information:

Hand Tally Counter

Hand Tally Counter

Approx. Rs 10 / Onwards

Four digit counter that tallies upto 9999. With single click action and zero re-set knob.

Additional Information:

Head Of Water Unit

Head Of Water Unit

Approx. Rs 10 / Onwards

Used in conjunction with the turbine/pump unit to provide an open or closed system in demonstrating the conversion of Electrical energy to kinetic energy in the pump and from potential energy in the head of water. Supplied with two vessels of 80mm dia and tubes. The upper platform has 38mm dia hole to allow it to use as a single reservoir.

Additional Information:

Density Ball

Density Ball

Approx. Rs 10 / Onwards

For demonstrating the effect of temperature on the density of a liquid. Consists of a copper ball about 75mm diameter, properly loaded so that its density in less than that of water and it floats. When the water is heated its density reduces and the ball sinks.

Additional Information:

Hook Collars

Hook Collars

Approx. Rs 10 / Onwards

For suspending spring balances, cords, pendulums and other apparatus from support rods or cross members. These metal collars are fitted with thumbscrews.


Hook i.d. 13mm 19mm
Cat. No. 3458-01 3458-02

Bicycle Wheel Gyroscope

Bicycle Wheel Gyroscope

Approx. Rs 10 / Onwards

Dramatically demonstrate angular momentum.

Spin this solid rubber bicycle wheel, hold the handles, and try to change its axis of rotation. The faster it spins, the harder it is to tip over stand on a Rotating Platform to experiment with gyroscopic precession and learn how satellites steer. Wheel diameter 60 cm.

Additional Information:

Pendulum Bob

Pendulum Bob

Approx. Rs 10 / Onwards

For various applications in a physics laboratory.
A cast iron ball of 79mm diameter with two hooks on opposite ends. Enamel finish.

Additional Information:

Lever Kit

Lever Kit

Approx. Rs 10 / Onwards

Consist of 5 wooden beams 600 x 44mm and marked every 38mm. Each beam has a groove across the center to indicate the fulcrum point. Also included are 4 wooden fulcrums and 40 square metal blanks of 25mm side.

Additional Information:

Hexagonal Spare Masses

Hexagonal Spare Masses

Approx. Rs 10 / Piece


Hanger 50g

Hanger 50g

Approx. Rs 10 / Onwards

For hanging slotted masses described in 3410-03, 3410-08 and 3410-11. Made of brass.

Additional Information:

Fly Wheel Unit

Fly Wheel Unit

Approx. Rs 10 / Onwards

The unit is the component part of the clear demonstration of the conversion of electrical energy into kinetic energy and back again when used in conjunction with the motor units and the lamp unit. The alloy wheel is of 115mm dia. The shaft has an aluminum pulley 44mm dia flatted on board size 150 x 100 x 10mm.

Additional Information:

Balls, Solid, Sets

Balls, Solid, Sets

Approx. Rs 10 / Onwards

Set of 14 balls. Two each of: aluminium, brass, copper, iron, lead, zinc and wood. Packed in a sturdy cardboard box.


Diameter Cat. No.
19mm 3484-10
25mm 3484-30

Boyle S Law Apparatus

Boyle S Law Apparatus

Approx. Rs 10 / Onwards

For obtaining precise readings of volume of a gas for a range of pressures. The apparatus consists of two borosilicate glass tubes, closed at the top and joined by rubber pressure tubing at the lower open ends. Both tubes are mounted on a sliding bracket which can be locked at any position on a two-rod frame, fitted on a wooden board. A meter stick graduated from 0-100cm x 1mm and figured every centimeter on both sides is fixed in the centre of the board. Provided with enamelled finished cast base with levelling screws. Supplied without mercury.

Additional Information:

Pressure Gauge

Pressure Gauge
Bourdon gauge on stand with tubulture for connection. Transparent back.

Additional Information:

Nuffield Spatula

Nuffield Spatula

Approx. Rs 10 / Piece


Made of stainless steel. Pressed into one bent flat end, raised center section and 20mm long scoop at the other end. Overall length is about 140mm and about 7mm wide middle strip.

Additional Information:

Specific Gravity Set

Specific Gravity Set

Approx. Rs 10 / Onwards

Consists of 300mL aluminum catch bucket, aluminum over flow can with angled spout and three hooked cubes of different metals. For use in finding the volume, density and specific gravity of an object.

Additional Information:

Open Manometer

Open Manometer

Approx. Rs 10 / Onwards

A multiple-use manometer for accurate measurement of gas pressure. Consists of a borosilicate glass manometer tube with a 50cm arm having funnel top and a 26cm arm with riffle for easy connection to rubber tubing. Mounted on a wooden board fixed over a metal stand.

Additional Information:

Hooke S Law Apparatus

Hooke S Law Apparatus

Approx. Rs 10 / Onwards

For proving hooke’s law of elasticity, i. E. That elongation of an object is directly proportional to the load applied and demonstrating the phenomenon of simple harmonic motion of a vibrating weight, potential energy etc. Consists of an adjustable mirrored scale 15cm long, graduated in millimeters, mounted on a support rod 30cm long fitted on a base. A hook attached to the rod supports a spring and indicator. Provided with a 50g brass hanger. Required slotted weights can be ordered separately.

Additional Information:

Wheel And Axle

Wheel And Axle

Approx. Rs 10 / Onwards

For determining the mechanical advantage and demonstrating the principle of conservation of energy.

Consists of four-step wooden wheel of 35, 50, 65 and 105mm diameters fitted with ball bearings, turning on a single, plated steel rod which can be clamped to a support stand using a right angle clamp. Each wheel has a flat groove to accept several turns of a cord with a small hole at each groove for holding a knotted cord. Can be fitted to a support stand with a right-angle clamp (not included). Recommended for use with nylon twine.

Additional Information:

Stop Clock

Stop Clock

Approx. Rs 10 / Onwards

For all kind of laboratory timing experiments. Dial diameter 100mm. With start/stop and zero re-set levers. The winding key is at the rear.

Additional Information:

Measuring Tape

Measuring Tape

Approx. Rs 10 / Onwards

Reinforced plastic measuring tape. Measures one side 60” and the other side 1520 mm.

Additional Information:

C-Clamps

C-Clamps

Approx. Rs 10 / Onwards

For clamping two apparatuses together or securing an apparatus to a table top. Also useful for setting up rod mounted pulleys. Cast iron enamelled frame. Plated screw and vise type nut.


Jaw opening 50mm(2”) 75mm(3”) 100mm(4”)
Cat. No. 3554-01 3554-02 3554-03

Plumb Bob

Plumb Bob
Made from hexagonal steel rod by carefully machine turning to a sharpened point. Dimensions are approx. (I x d), 85 x 20mm (3 1/3 x 25/32in) and weight approx. 140g. Provided with a screwed end cap with a hole to receive a cord.

Additional Information:

Lever Clamp (Knife Edge Clamp)

Lever Clamp (Knife Edge Clamp)

Approx. Rs 10 / Onwards

For fitting standard meter sticks used in setting up a demonstration balance to study principles of levers, moments, torque etc.. Made of spot welded steel. Designed for fastening to meter sticks by means of knurled set screw and easy viewing of the meter stick. Provided with a removable metal wire stirrup which serves as a weight hanger when placed in an inverted position.

Additional Information:

Stop Watch, Analog, 15 Minute, 1/10 Second, Single Action

Stop Watch, Analog, 15 Minute, 1/10 Second, Single Action

Approx. Rs 10 / Onwards

Dial is divided into 30 seconds with 1/10 second graduations. Has 0 to 15 minute registry. Easy to read numerals. Housed in a plated metal case a with glass covered dial. Mechanical 15 jewel lever movement. Start, stop, and reset operations are accomplished by a single button by successive depressions. Rewinding is done using anti-clockwise crown movement every eight hours. Supplied in a high impact plastic case. No batteries required.

Additional Information:

Accessories For Solar Cell

Accessories For Solar Cell

Approx. Rs 10 / Piece


(connections can be made through 4mm sockets)

Integrated unit with motor/fan, buzzer and a LED mounted on a single plate.

3572-30
Motor with fan
3572-31
Buzzer
3572-32
LED
3572-33

Additional Information:
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Physics Lab Instruments ?

    country-ico

    We will contact you soon !

    Rohit Sadana

    (Partner)

    Sadana Brothers

    Naraina Industrial Area Phase 1, New Delhi, Delhi, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us